Special Features; Intercom Calls - Motorola E51 Series User Manual

Special Features

If you have at least two handsets registered to your base unit, you can use the intercom
and call transferring features. Each handset is named HANDSETX. The X represents the
order (1, 2, 3, 4) in which the handset was registered to the base unit. (See the user guide
for the expansion handset for more information.)

Intercom Calls

1. When not on a call, press the INT key on any handset. ENTER HANDSET # appears
on the display.
2. Enter the number of the handset you wish to page (e.g., to call HANDSET2, press 2).
Press INT, ON/FLASH, v, or any of the dial pad keys on HANDSET2 to answer the
3.
intercom call. The screen on both handsets displays INTERCOM.
4. Press INT or OFF/CANCEL on either handset to end the call.
NOTE: If a handset is out of range, or you receive an outside call while attempting an
intercom call, the screen displays UNABLE TO CALL TRY AGAIN.
28