FCC and Interference Information
This equipment complies with Parts 15 and 68 of the FCC rules and the requirements
adopted by the Administrative Council for Terminal Attachments (ACTA).
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with applicable FCC Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular plug are provided with this product. They
are designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Notification of the Local Telephone Company
On the bottom of this equipment is a label that contains, among other information, a
product identifier in the form US:AAAEQ##TXXX. You must, upon request, provide this
information to your telephone company.
The digits represented by ## in the product identifier indicate the Ringer Equivalency
Number (REN) for this equipment. The REN is useful in determining the number of
devices you may connect to your telephone line and still have all of these devices ring
when your telephone number is called. In most (but not all) areas, the sum of the RENs
of all devices connected to one line should not exceed 5. To be certain of the number of
devices, you may connect to your line as determined by the REN, contact your local
• This equipment may not be used on coin service provided by the telephone company.
• Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.