Calls; Make A Home Call - Motorola B801 User Manual

mobile phone, you may need to disable Bluetooth or unpair
the telephone base.) Refer to your Bluetooth enabled mobile
phone's user's guide for instructions. The telephone base
will not search and re-connect to this Bluetooth enabled
mobile phone until this feature is activated again.
To resume the auto connection
To resume the auto connection between the paired device(s)
and the telephone base, you will need to connect the
device(s) manually. Make sure the Bluetooth feature is
turned on in your Bluetooth enabled mobile phone. Select
Motorola B801/B802/B803/B804/B805 from the paired
device list in your Bluetooth enabled mobile phone to
reconnect. If the connection is successfully resumed, the
status icon will display on the handset screen, and the
Bluetooth LED of the corresponding Bluetooth button on the
telephone base will be on steadily.
NOTE
If the connection between the paired device and the
telephone base does not resume by manually connecting
the device on the paired device list, you will need to unpair
or de-register the device from the Bluetooth enabled mobile
Using the phone
phone. Make sure the device is no longer on the paired list
after de-registration; then follow the steps in section
"Pairing a Bluetooth enabled mobile phone" or "Pairing
a Bluetooth headset" as above to start the pairing
procedures again.
Replace a paired device
If you want to pair and connect a new device when there are
already two devices paired with the telephone base, press
and hold the Bluetooth button (which you want to terminate
the corresponding connection) on the telephone base until
the corresponding Bluetooth LED is flashing, the connection
via this Bluetooth button will be terminated automatically,
then start with step two of section "Pairing a Bluetooth
enabled mobile phone" or "Pairing a Bluetooth
headset". If you do not pair a new device within two minutes,
the Bluetooth LED flashes on the telephone base will turn off
and the system will return to idle mode.
3.3

Calls

3.3.1

Make a HOME call

< J
• Press or , then enter the telephone number.
21