Ip Subnet; Nt Domain; Must Match All Associations; Profile Properties: Wifi - Motorola USBw 100 Series User Manual

Motorola computer drive user manual
Hide thumbs Also See for USBw 100 Series:
Table of Contents

Advertisement

IP Subnet

Specify possible IP addresses that may be assigned to your Ethernet
interface when you are connected to this network. To specify a range of
addresses, enter only the beginning of the IP address. For example:
172
172.77
172.77.64
172.77.64.5

NT Domain

Specify the Windows NT domain that you will belong to when attached to
this network.

Must Match all Associations

When this box is checked, a network you are connecting to must match
ALL of the values entered above in order to use this profile.
When this box is NOT checked, only one matching value must be found.

Profile Properties: WiFi

This window contains the security settings for WiFi Network Profiles.
Follow these steps to configure WiFi network security.
In the
SSID
that the name entered here must match the SSID (Service Set Identifier)
used by the network exactly.
If the network you are configuring is a closed network, check
non-broadcast
If the network whose profile you are configuring does not use WEP or WPA
encryption, no further security configuration is necessary, the
36
The profile will be used if the Ethernet interface is assigned
any IP address that begins with 172
The profile will be used if the Ethernet interface is assigned
any IP address that begins with 172.77
The profile will be used if the Ethernet interface is assigned
any IP address that begins with 172.77.64
The profile will be used only if the Ethernet interface is
assigned 172.77.64.5
field, enter the broadcast name of the network profile. Note
network.
Creating and Managing Network Profiles
This is a
Enable
USBw 100
MAR 2009

Advertisement

Table of Contents
loading

Table of Contents