System Requirements
Following are the minimum system requirements for support of the USBw 200-series USB
WiMAX Adaptor
OS Level
Processor Speed
Disk Space
RAM requirement
Products Covered by this Guide
USBw25200 - 2500-2700 MHz band
USBw35200 - 3400-3600 MHz band
Installation
The USBw 200 is a fully Plug & Play USB device, with all operating software pre-loaded on the
USB device itself; no CD-ROM is required. When first plugged in, it installs all the necessary
software on your computer to provide high-speed Internet service using the latest WiMAX
technology. You may install the software on more than one computer, activating the WiMAX
service on the computer of your choice by plugging in the USBw 200.
Insert the USBw 200 into your laptop computer's USB port
Windows XP: If setup does not automatically
start: click "Start" and choose "Run". Type
"X:\InstVerif.exe" (where X is the USB drive
designation) and click "OK".
Windows Vista and 7: If setup does not
automatically start: click "Start" and choose
"Computer", right click on "USB drive" or "CD
drive" and choose "Open Auto Play". Select
"InstVerif.exe"
USBw 200 User Guide
Issue 1.0
Windows XP
SP2
(SP3 recommended)
500 MHz
40 MB
512 MB
-3 -
Windows Vista
All
All
1.0 GHz
1.0 GHz
40 MB
40 MB
1.0 GB
1.0 GB
.
Revision Date: 7/28/2010
Windows 7
6814927F14