Changing The Audio Language/Format; Changing The Audio Channel; Adjusting The Audio Output Level - Dolby D Level - Sony XAV-70BT Operating Instructions Manual

Changing the audio language/
format
For DVD, the audio language can be changed if
the disc is recorded with multilingual tracks. For
DVD/DivX, you can change the audio format
when playing a disc recorded in multiple audio
formats (e.g., Dolby Digital).
For DVD
1
During playback, touch "DVD Control."
2
Touch "Audio" repeatedly until the
desired audio language/format
appears.
Audio language
Source List ATT
Audio 1: English
Audio Subtitle Angle
15
Audio format/channel numbers*
The audio language switches among the
available languages.
When the 4-digit input prompt appears, input
the language code (page 69) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
* The format name and channel numbers appear as
follows.
Example: Dolby Digital 5.1 ch
Rear component × 2
Dolby D 3 / 2 . 1
Front component × 2 +
Center component × 1
To close the DVD control menu, touch "DVD
Control."
For DivX
1
During playback, touch "Play Menu,"
then "Audio" repeatedly until the
desired audio format appears.
To close the play menu, touch "Play Menu."
Top
Dolby D 3/2.1
Top Menu Menu
DVD Play Menu
Control SHUF
12:00
LFE component × 1

Changing the audio channel

When playing VCD/CD/MP3/WMA/AAC/
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
"2-Ch": Standard stereo sound (default)
"L-Ch": Left channel sound (monaural)
"R-Ch": Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
1
During playback, touch "Play Menu,"
then "Stereo" repeatedly until the
desired audio channel appears.
For MPEG-4
1
During playback, touch "Play Menu,"
then "Audio" repeatedly until the
desired audio channel appears.
To close the play menu, touch "Play Menu."
Note
You may not be able to change the audio setting
depending on the disc.
Tip
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
1
During playback, touch "Play Menu."
2
Touch the "Adjust" box to set to "ON."
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch "Play Menu."
MPEG-4
23