Download Print this page

Sanyo FX12 Instruction Manual page 3

Fm stereo/am etr cassette receiver with take-out security system & subwoofer line-out

Advertisement

Preset Scan button (P. SC)
By pushing the preset scan button, you can tune in sequence, the memorized or
preset stations for 5 seconds for each preset button 1 through 6 automatically.
To stop scanning, touch this button again or the desired preset button.
6) Auto store button (AST)
Pressing momentary Auto Store Button, AST mode is engaged and AST indica-
tor lights. Pressing this button for more then 2 sec., up to 6 stations are-automa-
tically preset in the AST memory (6 AM and 12 FM).
7) Preset buttons (1 to 6)
For presetting station, the unit has an electric memory circuit which is capable
of memorizing 6 AM, 12 FM and 18 (AM and FM) Auto Store Stations for a
total of 36 stations.
To memorize a program, tune in a desired station, and press and hold down the
desired preset button for at least 1 seconds.
8) Distant/Local select button (DX )
For strong local FM signal reception, the distant/local select button (DX) should
be in the local position. For a weak distant signal, the distant/local select button
(DX) should be in the distant position. The distant position (DX) will be shown
on the digital display.
9) Cassette Slot
10) EJECT button (A)
To eject the cassette, depress this button.
11) Fast Forward, Fast Rewind and Reverse button ( 44 , W , 4, )
To advance or rewind the tape at high speed, depress ( W ) button or ( 4 )
button. To stop and return to normal playback, lightly press the button which is
not pressed.
Reverse button
To reverse the tape direction, depress both buttons at the same time.
12) Tape selector button (MTL)
Set the tape select button (MTL) to select the proper equalization for the type
of tape to be used. Press the button for Metal/FeCr/CrOz
ton for Normal tape.
13) Dolby NR button* (00)
Set the Dolby NR select button (00)
whether the cassette tape has been recorded with Dolby N R (B type) or not.
Corporation.
"DOLBY" and the double-D symbol 00 are trademarks of Dolby Laboratories Licensing
Corporation.
to the proper position according to
- 2 -
tape. Re-press the but-

Advertisement

loading

This manual is also suitable for:

Fx22