Attaching The Base; Screen Position Adjustment - Acer H235H Service Manual

Attaching the Base

1 Attach the monitor stand arm to the base.
2 Ensure that the base is locked onto the monitor stand arm.

SCREEN POSITION ADJUSTMENT

To optimize the viewing position, you can adjust he monitor tilt, using both of your hands to hold
the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down.
connecting the power cord
• Check first to make sure that the power cord you use is the correct type required for your area.
• The monitor has a universal power supply hat allows operation in either 100/120 V AC r 220/240 V AC voltage area.
No user adjustment s required.
• Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet.
• For units using 120 V AC:Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
• For units using 220/240 V AC:Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The
cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
22