Panasonic KX-TGF320E Operating Instructions Manual page 38

Programming
3
Handset:
MOKN a Wait until "Base PIN" is displayed.
a Enter the base unit PIN (default: "0000").
a MOKN
R If you forget your PIN, see page 52.
Deregistering a handset
A handset can cancel its own registration to the
base unit, or other handsets registered to the
same base unit. This allows the handset to end its
wireless connection with the system.
Handset / Base unit
1
MMENUN#131
R All handsets registered to the base unit are
displayed.
2
MbN: Select the handset you want to cancel.
a MOKN
3
MbN: "Yes" a MOKN
4
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Increasing the range of the base unit
You can increase the signal range of the base unit
by using a DECT repeater. Please use only the
Panasonic DECT repeater noted on page 3.
Contact your Panasonic dealer for details.
Important:
R Before registering the repeater to this base unit,
you must turn the repeater mode on.
R Do not use more than one repeater at a time.
Setting the repeater mode
Handset / Base unit
1
MMENUN#138
2
MbN: Select the desired setting. a MOKN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Registering the DECT repeater (KX-A405/
KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
38
TGF320E(en)_0123_ver020.pdf 38
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
referring to the Installation Guide for the DECT
repeater.
1
Base unit:
Press and hold M N for about 5 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until the
indicator and indicator light green.
3
Base unit:
To exit the registration mode, press M N.
2015/01/23 18:26:30