Usage Cautions And Notes - Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Usage cautions and notes

When in use
Camera may become warm if used for long periods of time, but this is not a fault.
To avoid jitter, use a tripod and place in a stable location.
(Especially when using telescopic zoom, lower shutter speeds, or self-timer)
Keep the camera as far away as possible from electromagnetic equipment (such
as microwave ovens, TVs, video games etc.).
If you use the camera on top of or near a TV, the pictures and sound on the camera
•
may be disrupted by electromagnetic wave radiation.
Do not use the camera near cell phones because doing so may result in noise
•
adversely affecting the pictures and sound.
Recorded data may be damaged, or pictures may be distorted, by strong magnetic
•
fields created by speakers or large motors.
Electromagnetic wave radiation generated by microprocessors may adversely affect
•
the camera, disturbing the pictures and sound.
If the camera is adversely affected by electromagnetic equipment and stops
•
functioning properly, turn the camera off and remove the battery or disconnect AC
adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC adaptor
and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and
•
sound may be adversely affected.
Do not extend the supplied cord or cable.
Do not allow camera to come into contact with pesticides or volatile substances (can
cause surface damage or coating to peel).
Never leave the camera and the battery in a car or on a car bonnet in the summer.
It may cause leakage of the battery electrolyte, a generation of heat, and may cause a
fire and the battery to burst due to the high temperature.
Caring for your camera
To clean your camera, remove the battery or disconnect power plug, and wipe with a
soft, dry cloth.
Use a well-wrung wet cloth to remove stubborn stains, before wiping again with a dry
cloth.
Do not use benzene, thinners, alcohol, or kitchen detergent, as these may damage
the outer casing and finish of the camera.
If using a chemically-treated cloth, read the supplied instructions carefully.
Do not touch the lens barrier (P.11).
When not using for a while
Turn off camera power before removing battery and card (ensure that battery is
removed to prevent damage through over-discharge).
Do not leave in contact with rubber or plastic bags.
Store together with a drying agent (silica gel) if leaving in drawer, etc. Store batteries
in cool (15 °C-25 °C (59 °F-77 °F)) places with low humidity (40% - 60%) and no
major temperature changes.
Charge battery once per year and use completely before storing again.
122
VQT1Z82
Memory cards
To prevent damage to cards and data
• Avoid high temperatures, direct sunlight, electromagnetic waves, and static
electricity.
• Do not bend, drop, or expose to strong impacts.
Do not touch connectors on reverse of card or allow them to become dirty or wet.
•
When disposing of/transferring memory cards
• If using the 'format' or 'delete' functions on your camera or computer, this only
changes the file management information, and does not completely delete the data
from within the memory card. When disposing of or transferring your memory cards,
we recommend physically destroying the memory card itself, or using commercially
available computer data erasing software to completely delete the data from the
card. Data within memory cards should be managed responsibly.
Personal Information
If names or birthdays are set in BABY mode or in the FACE RECOG. function
personal information will be included in the camera and the pictures that have been
taken.
Disclaimer
Data containing personal information can be altered or lost due to malfunction, static
electricity, accidents, breakdowns, repairs, or other operations.
Panasonic will not be liable for any damage that occurs, direct or indirect, as a result
of the alteration or loss of data containing personal information.
When ordering repairs or transferring/disposing of the camera
• To protect your personal information, please reset the settings. (P.24)
• If any pictures are contained in the built-in memory, copy (P.98) them to a memory
card if necessary, and then format (P.26) the built-in memory.
• Remove the memory card from the camera.
• When ordering repairs, the built-in memory and other settings may be returned to
the initial purchase state.
• If the above operations cannot be performed because of a camera malfunction,
consult with the dealer or nearest Service Center.
When transferring or disposing of your memory card, see 'When disposing of/
transferring memory cards' in the previous section.
For DMC-ZS3 users
This product is licensed under the AVC patent portfolio license for the personal and
noncommercial use of a consumer to (i) encode video in compliance with the AVC
Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was obtained from a video
provider licensed to provide AVC Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
,
123
VQT1Z82