Download  Print this page

Safety Guidelines - Definitions; Safety Warnings And Instructions; Charging Procedure - Black & Decker LI2000 Instruction Manual

Lithium cordless screwdriver
Hide thumbs


Table of Contents
Warning! Use of this tool can generate and/or disperse
dust, which may cause serious and permanent respiratory
or other injury. Direct particles away from face and body.
It is important for you to read and understand this manual.
The information it contains relates to protecting Your
Safety and Preventing Problems. The symbols below
are used to help you recognize this information.
Danger! Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Warning! Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
Caution! Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
Notice! Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may
result in property damage.
1. Forward / Reverse / Lock Off slider
2. Pivot release button
3. Hex spindle
4. Power / Manual mode Collar
5. Charger port
6. Charger
7. Charger plug


f Do not disassemble or open, drop (mechanical abuse),
crush, bend or deform, puncture, or shred.
f Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose
to water or other liquids, or expose to fire, excessive
heat including soldering irons, or put in microwave oven.
f Only use the battery / tool with a charging system
specified by the manufacturer/supplier.
f Do not short-circuit a battery or allow metallic or
conductive objects to contact both battery terminals
f Dispose of used batteries promptly according to the
manufacturer/supplier's instructions.
f Improper battery use may result in a fire, explosion,
or other hazard.
f Battery / tool usage by children should be supervised.
1. This manual contains important safety and operating
2. Before using battery charger, read all instructions and
cautionary warnings on battery charger and product
using battery.
Caution! To reduce the risk of injury, use this charger
only with this product. Batteries in other products may
burst causing personal injury or damage.
3. Do not expose charger to rain or snow.
4. Use of an attachment not recommended or sold by
Black & Decker may result in a risk of fire, electric
shock, or injury to persons.
5. To reduce risk of damage to electric plug and cord,
pull by plug rather than cord when disconnecting charger.
6. Make sure cord is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage
or stress.
7. An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire, electric shock or
8. Use only the supplied charger when charging your tool.
The use of any other charger could damage the tool
or create a hazardous condition.
9. Use only one charger when charging.
10. Do not attempt to open the charger. There are no
customer serviceable parts inside. Return to any
authorized Black & Decker service center.
11. DO NOT incinerate the tool or batteries even if they
are severely damaged or completely worn out. The
batteries can explode in a fire. Toxic fumes and
materials are created when lithium ion battery packs
are burned.
12. Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Inserting or removing the battery from the
charger may ignite the dust or fumes.
13. If battery contents come into contact with the skin,
immediately wash area with mild soap and water.
If battery liquid gets into the eye, rinse water over the
open eye for three minutes or until irritation ceases.
If medical attention is needed, the battery electrolyte
is composed of a mixture of liquid organic carbonates
and lithium salts.
Warning! Burn hazard. Battery liquid may be flammable
if exposed to spark or flame.


Important! The batteries in your tool are not fully
charged at the factory. Before attempting to charge them,
thoroughly read all of the safety instructions.
f The charging socket (5) is keyed to lock out other
chargers. Align the tab in the charger plug (7) with the
key in the charging socket.


Table of Contents

  Also See for Black & Decker LI2000

  Related Manuals for Black & Decker LI2000

This manual is also suitable for: