JVC KD-ADV49 Instructions Manual page 47
Dvd/cd receiver
Hide thumbs
Also See for KD-ADV49:
- Instructions manual (225 pages) ,
- Installation & connection manual (6 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
2
AV Menu
Enter
Mode
3
Mode
Mono
DX/Local
SSM
Blend Hold
Auto
Blend Hold
Analog
Digital
Auto
Exit
Analog: Tuning to analog audio only
Digital: Tuning to digital audio only
Auto:
Switch between digital and analog
audio automatically
• If no sound can be heard from the selected setting,
change the setting to <ANALOG> or <DIGITAL>.
• The setting automatically changes to <AUTO> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
Tuning in to stations with
sufficient signal strength
This function works only for FM bands.
Once you have activated this function (selected
<Local>), it always works when searching for FM
stations.
1
2
AV Menu
Enter
Mode
3
Mode
Mono
DX/Local
SSM
Blend Hold
DX
DX/Local
DX
Local
Exit
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
• During SSM search ( page 12), this function
cancels temporarily.
Page 47
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
