Speaker Assembly - HP EliteBook 820 G3 Maintenance And Service Manual

4. Lift the smart card reader board left to remove it from the top cover (5).
Reverse this procedure to install the card reader board.

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the speaker assembly:
1. Remove the two Phillips PM2.5x3.0 screws that secure the speakers to the computer (1).
Bottom cover on page
Battery on page 35).
System board on page
32).
49).
Component replacement procedures
Spare part number
821684-001
59