This menu allows you to set up the administrator and user password
of your Notebook PC. It also allows you to control the access to your
Notebook PC's hard disk drive, input/output (I/O) interface, and USB
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup. If ONLY
the user's password is set, then this is a
power on password and must be entered to boot
or enter Setup. In Setup, the User will have
Administrator Password Status
User Password Status
HDD Password Status :
Set Master Password
Set User Password
I/O Interface Security
System Mode state
Secure Boot state
Secure Boot Control
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Notebook PC E-Manual
If you install a User Password, you will be prompted to input
this before entering your Notebook PC's operating system.
If you install an Administrator Password, you will be
prompted to input this before entering BIOS.
Save & Exit
must be in the
Minimum length 3
Maximum length 20
→← : Select Screen
: Select Item
: Change Opt.
: General Help
: Optimized Defaults
: Save & Exit