AEG FAVORIT 34030VI User Manual
Hide thumbs Also See for FAVORIT 34030VI:

Advertisement

Quick Links

EN User manual
FAVORIT 34030VI

Advertisement

Table of Contents
loading

Summary of Contents for AEG FAVORIT 34030VI

  • Page 1 EN User manual FAVORIT 34030VI...
  • Page 2: Table Of Contents

    11. ENVIRONMENT CONCERNS ..........16 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable have created it to give you impeccable have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
  • Page 3: Safety Instructions

    ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • The first time you use the appliance, pliance, carefully read the supplied in- make sure that there is no leakage. structions. The manufacturer is not re- • The water inlet hose has a safety valve sponsible if an incorrect installation and and a sheath with an inner mains ca- use causes injuries and damages.
  • Page 4 13 amp ASTA (BS • Do not drink and play with the water in 1362) fuse. the appliance. • Do not remove the dishes from the 1.3 Use appliance until the programme is completed. There can be detergent •...
  • Page 5: Product Description

    ENGLISH 2. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Water hardness dial Water hardness dial Water hardness dial 3. CONTROL PANEL CONTROL PANEL CONTROL PANEL On/off button Programme button...
  • Page 6: Programmes

    Indicators Description Wash indicator. Rinse aid indicator. This indicator is off while the programme operates. Salt indicator. This indicator is off while the programme oper- ates. 4. PROGRAMMES Degree of Programme Duration Energy Water Programme soil phases (min) (kWh)
  • Page 7: Options

    ENGLISH 5. OPTIONS 5.1 Acoustic signals 5. Wait until the programme indicator (A) goes off and the end indicator The acoustic signals operate in these comes on (the programme indicator conditions: (B) continues to flash). • When the programme is completed. •...
  • Page 8: Manual Adjustment

    Water softener Water hardness adjustment German French mmol/l Clarke Manual Elec- degrees degrees degrees tronic (°dH) (°fH) 51 - 70 91 - 125 9.1 - 12.5 64 - 88 43 - 50 76 - 90 7.6 - 9.0 53 - 63...
  • Page 9: Filling The Salt Container

    ENGLISH 6.2 Filling the salt container CAUTION! Only use dishwasher salt. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To pre- vent it, after you fill the salt con- tainer, start a programme.
  • Page 10: Daily Use

    10 www.aeg.com 7. DAILY USE 1. Open the water tap. • Make soft the remaining burned food on the items. 2. Press the on/off button to activate the appliance. Make sure that the ap- • Put hollow items (cups, glasses and pliance is in setting mode.
  • Page 11 ENGLISH CAUTION! Use only detergents for dish- washers. Press the release button (B) to open the lid (C). Put the detergent in the compart- ment (A) . If the programme has a prewash phase, put a small quantity of deter- gent in the compartment (D).
  • Page 12: Care And Cleaning

    12 www.aeg.com Starting a programme without 2. Press the delay button, the delay in- dicator goes off. delay start 3. Close the appliance door. The pro- 1. Open the water tap. gramme starts. 2. Press the on/off button to activate the appliance.
  • Page 13: Troubleshooting

    ENGLISH 8.1 Cleaning the filters Turn the filter (A) counterclockwise and remove it. To disassemble the filter (A), pull apart (A1) and (A2). Remove the filter (B). Wash the filters with water. Put the filter (B) to its initial position. Put the filter ( Put the filter ) to its initial position.
  • Page 14 14 www.aeg.com Alarm code Problem • The indicator of the set programme The appliance does not fill with water. flashes continuously. • The end indicator flashes 1 time in- termittently. • The indicator of the set programme The appliance does not drain the wa- flashes continuously.
  • Page 15 ENGLISH After the checks are completed, activate If other alarm codes show, contact the the appliance. The programme contin- Service. ues from the point of interruption. If the problem occurs again, contact the Service. 9.1 The washing results and drying results are not satisfactory Problem Possible cause Possible solution...
  • Page 16: Technical Information

    16 www.aeg.com Problem Possible cause Possible solution The quantity of detergent Make sure that you add the was too much. correct quantity of deter- gent in the dispenser be- fore you start a programme. Dry water drop The released quantity of...
  • Page 17 ENGLISH facility or contact your municipal appliances marked with the symbol office. with the household waste. Return the product to your local recycling...
  • Page 18 18 www.aeg.com...
  • Page 19 ENGLISH...
  • Page 20 www.aeg.com/shop...

Table of Contents