Bluetooth Settings] - Sony BDP-S6700 Operating Instructions Manual

x [DSD Output Mode]
[Auto]: Outputs DSD signals from the
HDMI OUT jack when playing a Super
Audio CD and DSD format file. Outputs
LPCM signals instead if the HDMI
connected device not support DSD.
[Off]: Outputs PCM signals from the
HDMI OUT jack when playing a Super
Audio CD and DSD format file.
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by
mixing the interactive and secondary
audio to the primary audio.
[Off]: Outputs the primary audio only.
Select this to output HD audio signals to
an AV amplifier (receiver).
x [Digital Music Enhancer]
[On]: Set the sound effect when playing
Internet content or USB content.
[Off]/[Sound Bar Mode]: Turns off the
function.
x [Dolby D Compatible Output]
[On]: Converts DTS audio source to
Dolby Digital audio by using EDID
(Extended Display Identification Data).
[Off]: Turns off the function.
x [Audio DRC]
[Auto]: Performs playback at the
dynamic range specified by the disc
(BD-ROM only). Other discs are played
back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
30
x [Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS Neo:6.

[Bluetooth Settings]

x [Bluetooth Mode]
[On]: Enables Bluetooth settings and
functions.
[Off]: Disables Bluetooth settings and
functions.
x [Device List]
Displays a list of paired and detected
Bluetooth receivers when [Bluetooth
Mode] is set to [On].
x [Bluetooth Codec - AAC] /
[Bluetooth Codec - LDAC]
This function is enabled when
[Bluetooth Mode] is set to [On].
[On]: Enables AAC/LDAC codec.
[Off]: Disables AAC/LDAC codec.
b
This function is disabled during connection
with a Bluetooth device.