DEH-2096ZRN
7.1.2 DISASSEMBLY
-
Removing the Upper Case (not shown)
1. Remove the screw.
2. Remove the upper case.
-
Removing the CD Mechanism Module (Fig.1)
Remove the four screws.
Disconnect the connector and then remove the
CD Mechanism Module (not shown).
-
Removing the Grille Assy (not shown)
1. Disconnect the four stoppers and then remove the
Grille Assy.
-
Removing the Mother Unit
Remove the two screws (Fig.2).
Remove the four screws and then remove
the Heat Sink (Fig.2).
Disconnect the three claws (Fig.3).
Remove the screw (Fig.3).
Remove the two screws and then remove
the Mother Unit (Fig.3).
50
CD Mechanism Module
Heat Sink
Mother Unit
Fig.1
Fig.2
Fig.3