Saeco HD8603 Bravista Latte + User Manual

Saeco HD8603 Bravista Latte + User Manual

Hide thumbs Also See for HD8603 Bravista Latte +:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Saeco HD8603 Bravista Latte +

  • Page 5 ENGLISH 6...
  • Page 6: Table Of Contents

    ENGLISH Table of contents Introduction General description Important Electromagnetic fields (EMF) Before first use Installing the machine Preparing for use Filling the water tank Using the machine for the first time Using the machine Adjusting the drip tray and dispensing spout positions Capsules Brewing coffee Adjusting the coffee quantity...
  • Page 7: General Description

    ENGLISH General description (Fig. 1) Capsule compartment opening lever Water tank lid Water tank Capsule compartment Mains cord Steam outlets Milk carafe attachment point Control panel On/off button (green) 10 Espresso button (white) 11 Café latte button (white) 12 Lungo button (yellow) 13 Frothed milk button (white) 14 Service indicator light (orange) 15 Rinse milk circuit button (orange)
  • Page 8 Pull at the plug, not at the mains cord. Do not touch the plug with wet hands. If the mains cord is damaged, you must have it replaced by Saeco, a service centre authorised by Saeco or similarly qualified persons in order to avoid a hazard.
  • Page 9: Electromagnetic Fields (Emf)

    ENGLISH Electromagnetic fields (EMF) This machine complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Before first use Installing the machine Remove all packaging material from the machine. Place the machine on a table or worktop away from the tap, the sink and heat sources.
  • Page 10: Using The Machine For The First Time

    ENGLISH Using the machine for the first time When you use the machine for the first time or if you have not used it for 2 weeks or longer, perform the following steps: Place a cup under the coffee dispensing spout and lift the dispensing spout up in the horizontal position.
  • Page 11: Using The Machine

    ENGLISH Using the machine Adjusting the drip tray and dispensing spout positions The machine can be used with a variety of cup sizes to dispense your different coffee varieties. You can adjust the position of the drip tray and the dispensing spout to create various dispensing positions.
  • Page 12 ENGLISH Insert a capsule. Push the lever downwards to close the capsule compartment. Note: If the compartment opening lever does not close easily, check if the capsule is inserted correctly and if the used capsule drawer is not full. Press the desired coffee button: ,Espresso: press the white button ,Lungo: press the yellow button ,Black coffee: press the blue button...
  • Page 13: Adjusting The Coffee Quantity

    ENGLISH Adjusting the coffee quantity Each capsule contains the optimal amount of ground coffee (8 grams) for one cup of espresso or lungo with an optimal flavour. You can adjust the amount of brewed coffee according to your taste and the size of your cup, mug or glass.
  • Page 14 ENGLISH Remove the milk carafe lid. Fill the milk carafe with milk to a level between the MIN and MAX indications. Put the lid on the milk carafe properly. Inserting and removing the milk carafe Note: Do not hold the milk carafe by the lid. The lid can come off the milk carafe.
  • Page 15: Café Latte, Frothed Milk, Latte Macchiato

    ENGLISH To remove the milk carafe, lift it and pull it carefully away from the machine. Café latte, frothed milk, latte macchiato Be careful: before milk is dispensed, small jets of hot water may come out of the machine. Do not select coffee varieties that contain milk if the milk carafe is not in place.
  • Page 16: Frothed Milk

    ENGLISH Insert an espresso capsule. Fill the milk carafe with milk to a level between the MIN and MAX indications. Put the lid on the milk carafe and place the carafe in the machine. Press and hold the white café latte button for 3 seconds until it starts to flash at brief intervals. Then release the button.
  • Page 17: Adjusting The Amount Of Frothed Milk

    ENGLISH Adjusting the amount of frothed milk You can adjust the amount of frothed milk prepared according to your preference and the size of your glass. Fill the milk carafe with milk to a level between the MIN and MAX indications.
  • Page 18: Rinsing The Milk Circuit

    ENGLISH The machine stops brewing automatically once it has dispensed the preset volume. To stop the brewing process, you can press the espresso button again. Lift the lever to remove the used capsule. Rinsing the milk circuit Rinse the milk circuit right after use, to ensure optimal hygiene. Note: The rinse button lights up as a reminder and it remains lit until the circuit has been rinsed or the machine has been switched off.
  • Page 19 ENGLISH Remove the used capsule drawer by pulling out the drip tray as far as it goes. Push the sliding lock on the left side of the used capsule drawer upwards and pull the drip tray out of the used capsule drawer. Empty the drip tray.
  • Page 20: Daily Cleaning Of The Water Tank

    ENGLISH Always insert the used capsule drawer before you insert the drip tray. Do not push both parts into the machine at once. Daily cleaning of the water tank Rinse the water tank under the tap every day. This prevents scale and other particles from clogging the filter at the bottom of the water tank.
  • Page 21 ENGLISH Press the white rinse button. Wait until the dispensing stops. Empty the milk container and remove the milk carafe. Remove the lid and empty the milk carafe. You can now clean the components of the milk frothing system. Perform the following steps: Remove the tube attached to the milk carafe lid by pulling it out.
  • Page 22 ENGLISH Open the lid of the milk dispensing spout. Remove the lower part of the milk dispensing spout from the upper part. Clean all the components in lukewarm water with a mild washing-up liquid. Rinse all components with tap water and dry them completely. The internal parts of the frothing system are dishwasher-safe.
  • Page 23: Descaling The Machine

    Only use the Saeco descaling solution to descale the machine. The Saeco descaling solution is designed to ensure optimal performance of the machine. You can buy the Saeco descaling solution (CA6700)online at www.philips.com...
  • Page 24: Descaling Procedure

    Remove and empty the water tank, drip tray, waste water drawer and used capsule drawer. Pour the entire bottle of Saeco descaling solution 250ml into the water tank. Add water to the descaling solution in the water tank up to the MAX indication.
  • Page 25 ENGLISH The orange service indicator light flashes and the white café latte button lights up continuously when all the descaling solution has been dispensed at the end of the descaling cycle. Empty the bowl and drip tray and place the bowl and drip tray back. Remove the water tank and rinse it under the tap, then fill it up to the MAX level with fresh water. Place the water tank back onto the machine.
  • Page 26: Meaning Of Light Signals

    ENGLISH Meaning of light signals The on/off button flashes slowly. The machine is warming up. The rinse milk circuit button light lights up continuously. You have to perform a milk carafe rinsing cycle. Follow the instructions in chapter ‘Using the machine’, section ‘Rinsing the milk circuit’. The service indicator light lights up continuously.
  • Page 27: Troubleshooting

    ENGLISH Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support or contact our Consumer Care Centre on 1300 363 391 in Australia or 0800 658 224 in New Zealand.
  • Page 28 ENGLISH Problem Possible cause Solution The machine suddenly stops There is not enough water in Fill the water tank with fresh tap water brewing coffee. the water tank. up to the MAX indication. Coffee grounds end up in A small amount of ground This is normal.
  • Page 29: Warranty

    ENGLISH Warranty IMPORTANT: Please keep this warranty card together with your proof of purchase for use when claiming. AUSTRALIA Philips Consumer Lifestyle Consumer Care: 1300 363 391 Website: www.philips.com/support NEW ZEALAND Philips Consumer Lifestyle Consumer Care: 0800 658 224 Website: www.philips.com/support In this warranty: We or us means Philips Electronics Australia Limited ACN 008 445 743 or Philips New Zealand Limited (Company Number 1723), and our...
  • Page 30 ENGLISH Additional Warranty: In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand or any other applicable law, we provide the following warranty against defects: If, during the first 2 years from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will repair or replace the...
  • Page 34 Specifications are subject to change without notice. ©2015 Koninklijke Philips Electronics N.V. 4219.440.5204.2 All rights reserved.

Table of Contents