Servicing Notes - Sony STR-KS2000 Service Manual

Multi channel av receiver
Hide thumbs Also See for STR-KS2000:
Table of Contents

Advertisement

QQ
3 7 63 1515 0
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
NOTE OF REPLACING THE IC3511 AND IC3513 ON
THE HDMI RE BOARD
IC3511 and IC3513 on the HDMI RE board cannot exchange with
single. When IC3511 and IC3513 on the HDMI RE board are dam-
aged, exchange the entire mounted board.
TE
L 13942296513
www
.
http://www.xiaoyu163.com

SERVICING NOTES

x
ao
u163
y
i
http://www.xiaoyu163.com
SECTION 1
2 9
8
Q Q
3
6 7
1 3
1 5
co
.
STR-KS2000
9 4
2 8
0 5
8
2 9
9 4
2 8
m
9 9
9 9
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents