Tools And Test Equipment - Motorola MOTOFONE F3 Service Manual
Digital wireless telephone gsm 900/1800 or gsm 850/1900 mhz gprs
Hide thumbs
Also See for MOTOFONE F3:
- Getting to know manual (12 pages) ,
- Quick start manual (44 pages) ,
- Brochure (1 page)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Tools and Test Equipment
Table 1. General Test Equipment and Tools
Motorola
1
Part Number
See Table 5
Charger
Antistatic Mat Kit (includes 66-80387A95 antistatic
0180386A82
mat, 66-80334B36 ground cord, and 42-80385A59
wrist band)
8102430Z04
GSM / DCS / PCS Test SIM
6680388B67
Disassembly tool, plastic with flat and pointed
ends (manual opening tool)
6680388B01
Tweezers, plastic
RSX4043-A
Torque Driver
Torque Driver Bit T-5 Plus, Apex 440-6IP Torx Plus
—
or equivalent
Size 0 Phillips head driver
2
HP34401A
Digital Multimeter
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
6809505A65-A
1 and 2
MOTOFONE F3
6809505A65-A
Table 1 lists the tools and test equipment used on F3 telephones. Use either the
listed items or equivalents.
Description
October 27, 2006
Tools and Test Equipment
Application
Used to charge battery and to power phone
Provides protection from damage to phone caused
by electrostatic discharge (ESD)
Used to enable manual test mode
Used during assembly/disassembly of phone
Used during assembly/disassembly
Used to remove and replace screws
Used with torque driver
Used to remove transceiver board screws
Used to measure battery voltage
23
Hide quick links:
Advertisement
Table of Contents
