LG SIMs 2.0 User Manual page 10

2. Locate the cable labeled MVC Jig inside the outdoor unit. If this
cable is not there, reinstall the handle cover and remove the
top cover of the outdoor unit.
3. Locate the SIMs WLAN module and the SIMs
interface cable.
4. Connect USB connector on the interface cable
to USB connector on the SIMs WLAN module.
5. If the MVC Jig cable is present, connect the
other end of the interface cable to the MVC
Jig cable connector.
6. If the MVC Jig cable is not present, connect the
other end of the interface cable to the LGMV
connector on the outdoor unit circuit board.
Due to our policy of continuous product innovation, some specifications may change without notification.
10
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
LG SIMs 2.0