3. Using the Baby Monitor
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's head by rotating the camera up, down, left
and right until you are satisfied with the image shown on the Parent Unit.
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
Pan and Tilt
The camera can be remotely controlled from the Parent Unit.
1. Press the
UP button or
2. Press the
LEFT button or
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
Press and hold the
the Baby Unit's loudspeaker. The
VIDEO ON/OFF key to turn the LCD display on or off, whilst still
leaving the audio monitor on.
Using the Baby Monitor
DOWN button to tilt up or down.
RIGHT button to pan left or right.
TALK button on the Parent Unit to talk to your baby through
icon will be displayed at the top of the LCD
icon will be displayed at the