Eceiverv; Eceiver Olume Ontrol; Ntercom Peration; Aking An - GE 21008 User Manual

when you call your bank you may need to enter your bank account
number. Temporarily switching to Touch Tone mode allows you to send
your number.
1. Dial the telephone number, and wait for the line to connect.
2. When your call is answered, press the * tone button on the handset
touch-tone pad to temporarily change from PULSE dialing to TONE
dialing.
3. Follow the automated instructions to get the information you need.
4. Hang up the handset, and the phone automatically returns to PULSE
(rotary) dialing mode.
R V
ECEIVER OLUME
When the handset is ON (in talk mode) you may adjust the receiver
volume by pressing the cid/vol (up or down arrow) button. There are four
volume levels to choose from. When the maximum or minimum volume
level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is
maximum.
I O

NTERCOM

The intercom feature allows you to have a conversation with another
registered handset without tying up the telephone line. And since the
telephone line is not in use, you may still receive incoming calls.
M I

AKING AN

NTERCOM
1. Make sure the phone is OFF (not in talk mode).
2. Press the PAGE/INT button on the handset.
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the PAGE/INT button again or the EXIT button
on the sending handset.
4. Wait for the person at the receiving handset to press the page/int button.
C
ONTROL
PERATION
C
ALL
21