Motorola i670 User Manual page 47

Making and Receiving Code Calls in
Direct Talk Mode
SM
To make a code call using Direct Talk:
1 Press and hold the Walkie-Talkie button. DT
Transmit appears on the first line of the display.
Begin speaking after your phone emits the
Direct Talk tone.
2 Release the Walkie-Talkie button to listen.
The tone emitted from your phone when making a
Direct Talk call is 4 beeps and sounds different
from the standard tone heard with on-network
Walkie-Talkie and Group Walkie-Talkie calls.
If you receive an error message:
• There may be no parties on your channel or
code.
• You are out of range.
When you receive a code call using Direct Talk, DT
Receive appears on the first line of the display.
Receive All
You can set your phone to receive Direct Talk
transmissions from any phone that is set to the
same channel, regardless of the code (1-15), by
setting the code to Receive All. When you receive
transmissions with the code set to Receive All,
the display changes from Receive All to the code
on which the transmission was received.
Note: You cannot initiate a code call when the
code is set to Receive All. If you press
the Walkie-Talkie button with the code set
to Receive All, you will receive an error
message.
To set the code to Receive All:
1 From the Direct Talk idle screen, press A
under Edit.
2 Scroll to Code.
3 Press A under Edit.
4 Select Receive All.
5 When you are finished, press A under Back to
return to the idle screen.
Channels and Codes
37