Installing The Power Switch; Removing The Coin Cell Battery - Dell Vostro 3560 Owner's Manual

Installing the power switch

1. Insert the power switch into the slot and press it until it clicks into place.
2. Route the power switch cable through the cable retention clip.
3. Connect the power switch cable to the connector on the system board.
4. Close the front bezel door.
5. Install the:
• bezel
• cover
6. Follow the procedure in

Removing the coin cell battery

1. Follow the procedure in
2. Remove the:
• cover
• bezel
3. Open the front bezel
4. To remove the coin cell battery:
a. Press the release latch until the coin cell battery pops out.
b. Remove the coin cell battery from the system board.
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
17