Table of Contents
Advertisement
Making a Talkgroup Call
1 View the message.
2 Highlight the Talkgroup ID you want to call.
3 Press m.
4 Select Talkgroup.
5 Press the PTT button.
Storing Message Information To
Contacts
If a message you receive contains a phone
number, Direct Connect number, Talkgroup ID, or
an email address, you can store this information to
Contacts.
These numbers may appear in the From field, the
To field, the Cc field, the subject line, or the body
of the message.
1 View the message.
2 Highlight the number or email address you want
to save.
3 Press m.
4 Select Save Number or Save Email.
5 To store the number or email address as a new
entry, select [New Contact]. -or-
To store the number or email address to an
existing entry, select the entry.
Actions for Received Messages
6 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number or email address.
7 Press A under Done.
Going to a Website
If a message contains one or more website URLs,
you can go to the website.
1 View the message.
2 Highlight the website URL you want to go to.
3 Press m.
4 Select Go To Website.
Note: The entire URL must appear in the
message. Otherwise, you cannot go to the
website.
Saving an Embedded Picture, Ring
Tone, or Voice Record
To save a picture, ring tone, or voice record that is
part of the body of a message you receive:
1 View the message.
2 Highlight the picture or play the ring tone or
voice record you want to save.
3 Press m.
4 Select Save Picture or Save Audio.
95
Advertisement
Table of Contents
