Motorola DROID BIONIC XT875 User Manual page 44

Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Touch Menu >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
42 Bluetooth® wireless
Wireless & networks
>
.
Scan for devices
.
, or enter the device passkey
Reconnect devices
To automatically reconnect your smartphone with a
paired device, simply turn on the device.
To manually reconnect your smartphone with a paired
device, touch the device name in the
list.
Disconnect devices
To automatically disconnect your smartphone from a
paired device, simply turn off the device.
To manually disconnect your smartphone from a paired
device, touch the device name in the devices list, then
OK
touch .
Change device name
Settings
Touch Menu >
Bluetooth settings
> >
OK
touch .
Bluetooth devices
Wireless & networks
>
Device name
. Enter a name and