Motorola CHARM 68000202552-B User Manual page 39

With motoblur
Table of Contents

Advertisement

Note:
Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
After you connect:
To
reconnect
with a device, simply turn on the
device or touch the device name in the Bluetooth
devices list.
To
disconnect
a device, simply turn off the device,
or touch the device name in the devices list and
> Disconnect.
press Menu
Turn Wi-Fi power on or off
> Settings > Wireless & networks
Find it:
Menu
> Wi-Fi
Note:
To extend battery life, turn off Wi-Fi power when
not in use.
Connect Wi-Fi networks
To find networks in your range:
> Settings > Wireless &
1
Press Menu
networks > Wi-Fi settings.
Touch Wi-Fi to turn on and scan. If Wi-Fi is already
2
on, press Menu
networks it finds within range.
Tip:
To see your phone's MAC address or other
Wi-Fi details, press Menu
> Scan. Your phone lists the
> Advanced.
3
Touch a network to connect. If necessary, enter
pass codes from the network administrator and
touch Connect.
When your phone is connected to a Wi-Fi network,
appears in the status bar
Tip:
Your phone automatically reconnects networks
you have used when they are in range and Wi-Fi power
is on.
Phone Network
You should not need to change any network settings.
Contact your service provider for help.
> Settings > Wireless & networks >
Press Menu
Mobile networks to show options for roaming
networks, network selection, operator selection, and
access point names.
Airplane Mode
Use airplane mode to turn all your wireless
connections off—useful when flying. Press Power
> Airplane mode.
Wireless
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Charm mb502Charm

Table of Contents