Table of Contents
Advertisement
Installing the Software
To transfer data between your phone and computer, you
must install the software included with the
Motorola Original™ data kit. See the data kit user's guide
for more information.
Making a Data Call
Use this procedure to send data from a connected
computer or hand-held device using a CSD or GPRS
network connection.
Action
1 Make sure that the phone is connected and
powered on. To connect your phone, see
page 137.
2 Open the application (such as dial-up-
networking) on your computer, and place the call
through the application.
Note: You cannot dial data numbers through
your phone's keypad. You must dial them
through your computer.
3 When the transfer is complete, end the call from
the connected device to close the connection.
Receiving a Data Call
Use this procedure to transfer a data call to a connected
computer or hand-held device.
145
Advertisement
Table of Contents
