Bluetooth Drop Timer - Motorola APX 6000 User Manual

Re-Pair Timer
Options
•
When the radio is powered OFF, pairing
key is lost immediately, and accessory
attempts to pair again. If pairing is
unsuccessful within the Drop Timer value,
the accessory automatically powers OFF.
Immediate
•
When the accessory is powered OFF, all
(for headset
keys are lost immediately, and the user
and PTT only)
must re-pair the devices.
•
When the devices lose Bluetooth
connection, the devices will attempt to re-
establish Bluetooth Connection within the
Drop Timer value.
•
When the radio is powered OFF, the
Infinite
accessory attempts to re-establish the
(for headset,
Bluetooth Connection for a period of time
PTT and data
depending upon the Drop Timer value. If
the devices fails to reconnect within the
devices)
period, the accessory then powers OFF.
50
English
Re-Pair Timer Scenarios


Bluetooth Drop Timer

The Bluetooth Drop Timer has two different settings and
functions, depending upon the selection of the Re-Pair Timer.
Re-Pair Timer
Options
0 – 15 minutes programmable buffer time to
re-establish the Bluetooth Connection when
Immediate
the Bluetooth signal is out of range.
(for headset
If either device powers OFF, the pairing keys
and PTT only)
are immediately cleared from both devices
and the devices must re-pair.
This Timer only applies to the Accessory.
The programmable timer choices are: 0 – 15
minutes, 2 hours, 4 hours or 8 hours.
Infinite
This is a "stay alive" time that the Accessory
(for headset,
will remain ON without the devices re-
PTT and data
connecting before powering off. The Radio
devices)
will remain ON until the user powers the
Radio OFF. The Radio and Accessory will
remain paired indefinitely. Once the devices
re-connect, the timer is reset.
Check with your dealer or system administrator for more
information about these timers.
See Pairing the Bluetooth Device with the Radio on page 51
to establish the Bluetooth Connection.
Drop Timer Options