Sony DAV-IS10 Operating Instructions Manual page 28

7
Reattach the rear cap using the wrench (supplied).
8
Secure the speaker to the bracket with the screw in Step 3 using hole 4.
Note
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
About connecting speaker cord
The connectors of the speaker cords are the same color as the jacks to be connected.
28
GB
4
3
Do not catch the
#
speaker cords
insulation in the speaker
Black
terminals.