Philips FW-C155 Service Manual page 8

Dismantling of the Front Panel and Bottom Panel assembly
1) Remove 8 screws D mounting the Front board.
2) Remove 1 screw E supporting the bracket, Combi board
(pos 33) to the Panel front (pos 8).
3) Remove 1 screw F (see figure 5) mounting the Mains
transformer body to the Panel Bottom (pos 25).
Note: Care must be taken not to damage the board
because of the heavy Mains transformer.
Figure 6
2-2
4) The Front and Combi boards together with the Mains
transformer can now be remove.
5) Loosen 6 screws G and eject both cassette doors to
remove the Tape mechanism (pos 12).
Note: During re-assembly of the Tape mechanism
and Front board care must be taken to ensure
the wires are properly dressed and not touch-
ing any moving parts on the Tape mechanism.
Figure 7
Figure 8
Service pos A
Service pos B
2-2
Note: After re-assembly, it is very important to ensure the
wires from the Tape mechanism are routed properly
to ensure that they do not touch/obstruct all moving
parts.