m500 Quick Setup Guide
Congratulations on your purchase of the Motorola m500 Digital
Audio Player. The m500 is a portable player that provides many
hours of MP3 and WMA playback. It features a lighted LCD, a
stopwatch, and an FM radio tuner.
Follow steps 1 through 4 to start playing music.
For detailed instructions on using the m500, please see the
User Guide located on the installation CD.
(Repeat and Shuffle)
Total Number of Tracks
1 Install the battery
Press in the battery cover latch while lifting off the m500's
Insert the battery so that the end with the metal contacts will
slide under the metal lip, and then snap the other end into
place against the plastic clips.
Snap the cover back on. Make sure it's lined up properly with
the slots in the player body.
2 Charge the battery
The AC adapter uses a Mini USB connector and attaches to the
m500 through the USB port. The first time you charge the battery,
let it recharge overnight.
Connect the AC adapter to the USB port on the bottom of the
Plug the AC adapter into an electrical outlet. The battery icon
will appear in the upper right corner of the LCD and show
itself filling up while charging.
When the battery is fully charged, the icon disappears.
Unplug the AC adapter and disconnect it from the player.
3 Connect the earphones
Connect the supplied earphones to the
of the m500.
Refer to the diagram below for the location of the EARPHONE
Operating the m500
Press to select menu options.
Move to navigate menu.
In Playback mode, move to control PLAY/PAUSE,
FORWARD, and REVERSE playback functions
or to enter Menu mode.
VOLUME + and -
Press to adjust volume level.
Connects to supplied earphones.
Slide into the LOCK position to disable
buttons and prevent accidental operation.
BATTERY COVER LATCH
Press in to unlock the battery cover
Press POWER to turn on the m500.
Press PLAY/PAUSE to start listening to music.
Press to turn on the player.
Press and hold to turn off.
Press to play or pause
playback. In Menu mode, press
to scroll up through choices.
connector on the top