Connecting An A/V Receiver, Tv, And Vcr - Motorola DCH6416 User Manual

7 CONNECTING YOUR DCH RECEIVER

Connecting an A/V Receiver, TV, and VCR

1. Connect a stereo audio cable to the
and the
INPUT L
2. Connect a video cable to the video out connector on the DCH receiver and the cable/TV
video connector on the A/V receiver.
3. Connect a stereo audio cable to the
receiver and the
4. Connect a stereo audio cable to the
stereo VCR and the
5. Connect a video cable to the input video connector on the stereo VCR and the video
VCR OUT CONNECTOR
6. Connect a video cable to the output video connector on the stereo VCR and the video
connector on the A/V receiver.
VCR IN
7. Connect a video cable to the input video connector on the Stereo TV (SDTV) and the
TV/monitor output video connector on the A/V receiver.
If your equipment supports it:
•
The digital audio optical (
outputs may be used in place of the stereo audio outputs (
most cases these outputs offer a higher level of audio quality, including support
for Dolby Digital 5.1 audio.
•
S-Video connections may be used in place of the standard composite video
connections. In most cases, S-Video offers a higher level of Standard Definition
video quality than composite video.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting your DCH Receiver to an HDTV – Video Only
AUDIO OUT L
and connectors on the A/V receiver.
R
VCR AUDIO OUT L
and
INPUT AUDIO L R
OUTPUT AUDIO OUT L
and
VCR AUDIO IN L
on the A/V receiver.
OPTICAL S/PDIF
and connectors on the DCH receiver
R
and
connectors on the stereo VCR.
connectors on the A/V receiver.
R
) or digital audio coaxial (
28
connectors on the A/V
R
and connectors on the
R
) audio
S/PDIF
and
AUDIO L
on page 19 .
). In
R