Making Calls; Indicator Light; Audio Tones - Motorola 6809518A57-A Quick Start Manual

MAKING CALLS

Function
Receive a call
Mute or unmute a call
Reject a call
End a call
Redial last call
Make a voice dial call
Answer second incoming Use phone to answer
call
Note: Your H620 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Note: Some features are phone/network dependent.

INDICATOR LIGHT

With No Charger Plugged In
Headset Indicator
Off
Three blue flashes
Steady blue
Rapid blue/purple flashes Connection successful
Quick blue flash
Slow blue pulse
Slow blue flash
Slow red flash
Slow purple pulse
Steady red
Quick red flash
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Action
Tap the Call button
Tap both Volume
buttons
Press and hold a
Volume button until
the ringer stops
Tap the Call button
Press and hold the
Call button until you
hear two tones
Tap the Call button
and wait for voice
prompt
(follow your phone's
instructions)
Headset Status
Power off
Powering on/off
Pairing/connect mode
Incoming/outgoing call
Connected (on a call)
Standby (not on a call)
Idle (not connected
to phone)
Connected call muted
Attempting to connect
Low battery
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator
Red
Yellow
Green

AUDIO TONES

Audio Tone
Ascending tone
Two descending
tones
Ring tone
Two short tones when
pressing Volume button
High/low tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Two ascending tones
Two rapid ascending
tones
Two rapid descending
tones
Low tone every
10 seconds
Headset Status
Charging (battery
level less than 50%
charge)
Charging (battery
level more than 50%
charge)
Charging complete
Headset Status
Powering on
Powering off
Incoming call
Volume at minimum
or maximum
Low battery
Out of range
Connected to phone
Mute enabled
Mute disabled
Mute reminder