Changing Volume Button Orientation - Motorola 6803578F47 User Manual

Test and use
Your phone and headset are now paired and ready to make and receive calls.
To confirm they are successfully paired and operating properly, place the
headset over your ear and make a call from your phone. You will hear ringing
from the headset.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
Note: If desired, your headset can be restored to original factory settings.
This action will erase all pairing information stored in your headset. Thus,
you will need to pair your phone and headset again. To restore your headset
to original factory settings, press and hold both Volume buttons and the Call
button at the same time for 10 seconds.

Changing volume button orientation

You can change the orientation of the volume buttons on your headset.
1. Turn the headset power off.
2. Press and hold the Volume button you want to assign as the «volume up»
button and slide the switch toward the microphone. The indicator light
flashes blue 3 times, then steady blue. When connected, it will flash blue/
purple.
English
7