Logging On - 3Com 1000 User Manual

Logging On

At the Logon screen displayed in Figure 3-2, enter
your user name and password (note that they are
both case-sensitive):
If you have been assigned a user name and pass-
word, enter those details.
If you are logging on for the first time (after
installation or initialization), use a default user
name and password to match your access
requirements. The defaults are shown in
Table 3-1. If you are setting up the Switch for
management, we suggest that you log on first
as admin.
Table 3-1 Default Users
User Name Default Access Level
Password
monitor monitor monitor — this user can view, but not
change all manageable parameters
manager manager manager — this user can access and
change the operational parameters
but not special/security features
security security security — this user can access and
change all manageable parameters
admin (no password) security — this user can access and
change all manageable parameters
Setting Up the Switch for Management
Figure 3-2 Logon screen
3-7