Operations; Starting; Before Setting The Temperature; Door Alarm - LG GN-B702HLPL Owner's Manual

Hide thumbs Also See for GN-B702HLPL:
Table of Contents

Advertisement

OPERATIONS

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.

BEFORE SETTING THE TEMPERATURE

The temperature of the refrigerator is kept constant regardless of changes in room temperature.
G
It is recommended that, once set, the temperature settings(the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
This refrigerator has one temperature control button for the refrigerator compartment and one
G
temperature control dial for the freezer compartment.
The default setting of the temperature control button for the refrigerator compartment is '3°C'.
G
(for external controller model),
The default setting of the temperature control dial for the freezer compartment is '3'.
G
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop
G
the compressor automatically as needed.

DOOR ALARM

When the door of the refrigerator or the freezer is open for 1 minute, an alarm will sound three times
It the door remains open, the alarm will repeat every 30 seconds.

SELF TEST

Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
If an error code is displayed, contact a service center. Do not disconnect the power cord from
the outlet.

CONTROLS FOR REFRIGERATOR COMPARTMENT

FOR INTERNAL CONTROLLER MODEL
REF. TEMP. CONTROL
Ref. Temp Control Button
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from MIN to MAX.
cooling.(MIN = warmest, MAX = coldest temperature)
16
.

Advertisement

Table of Contents
loading

Table of Contents