Brush Holder Inspection; Starter Motor Front Cover Inspection - Yamaha waverunner xlt800 Service Manual

– +
ELEC
STARTER MOTOR
6. Inspect:
G Armature coil continuity
Out of specification → Replace.
Armature coil continuity:
Commutator segments 1 Continuity
Segment - Laminations 2 No continuity
Segment - Armature shaft No continuity

Brush holder inspection

1. Measure:
Brush length a
G
Out of specification → Replace.
Min. brush length:
6.5 mm (0.26 in)
2. Check:
Brush holder continuity
G
Out of specification → Replace.
Brush holder continuity:
Brush holder - Base

Starter motor front cover inspection

1. Inspect:
Starter motor front cover bushing
G
Damage/wear → Replace the starter
motor front cover.
7-23
E
No continuity