Turning The Scansnap Off - Fujitsu scansnap sv600 Operation Manual

Turning the ScanSnap Off

1.
Press the [Stop] button on the ScanSnap for three seconds or longer.
a The power LED turns off.
In addition, the ScanSnap Manager icon in the Dock changes from
ATTENTION
If moving the ScanSnap, first turn the power off and remove all cables.
HINT
l When the computer is turned off, the ScanSnap is also turned off.
l When the ScanSnap is turned off, a notification window notifies you of the ScanSnap's
communication status.
To disable notifications of the ScanSnap's communication status, change the setting in the
following procedure:
1. Click the ScanSnap Manager icon
the keyboard, and then select [Preferences] from the
41).
a The [ScanSnap Manager - Preferences] window appears.
2. Clear the [Notify of the communication status] checkbox in the [Status Display] list.
in the Dock while holding down the [control] key on
"ScanSnap Manager Menu" (page
49
Turning the ScanSnap On or Off
to .