Fujitsu scansnap sv600 Operation Manual page 24

a Scanning of the book starts.
ATTENTION
l Do not perform the following operations during scanning. Doing so will stop scanning.
- Connect or disconnect the ScanSnap and other USB devices.
- Switch users.
- Allow the computer to enter sleep mode.
l Do not cover the white sheet with an object or hand during scanning. The color reproducibility
of the scanned image will be affected.
l Do not shake the table or desk when the ScanSnap is being used or move the documents
while they are being scanned. Doing so may distort the scanned image or blur the color.
HINT
l You can also start scanning a book by clicking the ScanSnap Manager icon
while holding down the [control] key on the keyboard and then selecting [Scan] from the
"ScanSnap Manager Menu" (page
l When timed mode is used, after the specified time the ScanSnap automatically starts
scanning. For details, refer to
a The power LED on the ScanSnap flashes in blue while the book is being scanned.
The [ScanSnap Manager - Image scanning and file saving] window appears.
White Sheets
41).
"Scanning Documents Using Timed Mode" (page
24
Scanning a Book
in the Dock
82).