Operation Procedure - Daewoo KOR-6L5R Operating Instructions & Cook Book

OPERATION PROCEDURE

This section includes useful information about oven operation.
1
Plug power supply cord into 230V AC 50Hz
power outlet.
2
Press eco button until beep sounds and
display is turned on.
3
After placing the food in a suitable
container,open the oven door and put it on the
glasstray. The glass tray and roller guide
mustalways be in place during cooking.
4
Close the door. Make sure that it is firmly
closed.
5
The oven door can be opened at any time
during operation by pushing the door open
button. The oven will automatically shut off.
To restart the oven, close the door and then
push the START button.
6
The oven automatically cooks on full power
unless set to a lower power level.
7
The display will show " : 0" when the oven is
plugged in, press and hold Eco button until
display is turned on and beep sounds.
WATTAGE OUTPUT CHART
• The power-level is set by push the Power button. The chart shows the display, the power level
and the percentage of power.
Push the Power button
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
8
Display will be returned to the " : 0 " when the
cooking time ends.
9
When the STOP/CLEAR button is pushed
during the oven operation, the oven stops
cooking and all information retained. To erase
all information, push the STOP/CLEAR button
once more.
If the oven door is opened during the oven
operation, all information is retained.
10
If the START button is pushed and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven
will not start cooking until the door is
completely closed or the program has been
reset.
11
Display turns off after 10 minutes.
Make sure the oven is properly installed
and plugged into the electrical outlet.
Power level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
9
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%