3-7. DIGITAL CONVERGENCE ADJUSTMENT
Convergence (Low) Mode
1.
Adjust the H.STAT and V.STAT with "HSTAT" and "VSTAT".
2.
Change "CONV_SW" to "7".
A. Horizontal Convergence
Adjust each misconvergence point in sequence.
B. Vertical Convergence
Adjust each misconvergence point in sequence.
2.
Repeat the procedure of A and B so that the convergence of the
entire screen is within the specifi cation.
Convergence (High) Mode
1.
Adjust the H.STAT and V.STAT with "HSTAT-HI" and "VSTAT-HI".
A. Horizontal Convergence
Adjust each misconvergence point in sequence.
B. Vertical Convergence
Adjust each misconvergence point in sequence.
2.
Repeat the procedure of A and B so that the convergence of the
entire screen is within the specifi cation.
3.
Change "MCR2" to "170".
3-8. CONVERGENCE SPECIFICATION
— 11 —
CPD-G220R/G220S
A Zone:
Primary Mode
Others
H: < 0.25mm
H: < 0.3mm
V: < 0.25mm
V: < 0.3mm
B Zone:
Primary Mode
Others
H: < 0.3mm
H: < 0.4mm
V: < 0.3mm
V: < 0.4mm