Morphy Richards 28024 Operating Instructions

Dual alarm clock
28024

OPERATING INSTRUCTIONS

Electrical requirements
Check the voltage on the rating plate of your digital clock
corresponds with your house electricity supply which must be A.C.
(alternating current).
For digital clocks with a fitted plug.
If the socket outlets in your home are not suitable for the plug supplied
with this appliance the plug should be removed and the appropriate
one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF
SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Should the fuse in the 13 amp plug require changing a 3 amp BS1362
fuse must be fitted.
P.3
Illustration
12
AL1 AL2
OFF
ALARM
1
PM
2
AL 1
3
Location of controls
1 Alarm button
2 PM indicator
3 Alarm 1 indicator
4 Time button
5 Snooze button
6 Fast forward button
Battery back-up facility
(Unit will work without a battery being fitted)
Your alarm clock is equipped with a battery back-up facility.
1 Remove the battery compartment cover (located underneath the unit)
by pushing in the clip and lifting off.
2 Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted
correctly)
3 Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run,
however, time keeping will not be accurate. The display will be
extinguished to conserve battery life but the memory will retain details of
the clock time and alarm settings.
If the optional battery is not installed in case of the AC power failure the
display will blink to indicate the power was interrupted. You will need to
reset the clock and alarm.
Battery back-up is designed to operate for a short period
only.
If the unit is not to be used for a prolonged period, remove
the battery to avoid battery leakage.
In the interests of environmental safety : dispose of batteries
safely.
SNOOZE FAST SLOW
TIME
FORWARD REVERSE
AL 2
4 5 6
7 Alarm 2 indicator
8 Clock display
9 Slow reverse button
10 Speaker
11 Battery compartment
12 Alarm selector switch
P.2
P.4
11
10
9
8
7