Indego 1300; Setup Of Mowing Schedule; Schedule - Bosch Indego Original Instructions Manual

40 | English
Mapping Completed
Mapping Completed. Mower is
returning to the docking sta-
tion. Please wait.
Back

Indego 1300

The screen will give an option to name the garden with one of
the preset names in memory. To then map another garden
place the Indego 1300 in the Docking Station in the additional
garden. The Indego will then allow you to map an additional
garden using the "Map Now" button.
Invented for life
Mow now
After a successful installation you can either immediately be-
gin to mow by pressing "Mow now" or set up a mowing sched-
ule in the "Menu > Change Schedule".
For more information about the behaviour of the machine
while mowing see section "Mowing".

Setup of Mowing Schedule

Configure the mowing schedules and the settings of the ma-
chine according to your needs.
Approximate runtimes to complete a full garden coverage are
quoted below. Please note that the runtimes will vary depend-
ing on the lawn complexity and number of objects within the
lawn area.
2
200 m 2 h
2
500 m 6 h
2
800 m 9 h
2
1000 m 12 h
2
1300 m 16 h
All menu items are listed in section "Menu Navigation".
F 016 L81 115 | (7.10.14)
Indego
Menu
The set up of a "Schedule" is explained in detail. The other
menus are self explaining.

Schedule

In "Menu > Change Schedule" 5 schedules are available.
"MANUAL" should be used if you only want to instruct the
machine to operate at the current time.
Each of the "CUSTOM" mode can be scheduled according to
your needs.
Example:
Select Daily Timer
Info
CUSTOM 2
CUSTOM 3
Edit CUSTOM 4
CUSTOM 5
Back
Select a "CUSTOM" schedule with the up/down cursors, e. g.
"CUSTOM 1" and press "Edit".
Edit Slots
00 04 08 12 16 20
M
T
W
T
Select the mowing day with the up/down cursors, e. g. "M".
Set up a start time slot for the selected day with the right/left
cursors.
Confirm the start time by pressing the bottom right arrow. Set
up an end time for the slot with the right/left cursors. Confirm
the end time by pressing the bottom right arrow.
The machine will work within a slot unless the battery needs
charging. If the lawn area has been completed before the end
of a time slot the machine will return to the docking station.
The programmed slot is shown on a schedule.
MANUAL
CUSTOM 1
Select
21:00
Bosch Power Tools