Intelligent Radiator Thermostat 1. Installation 1.1 Identify your eco thermostat eco comes in several versions to meet the demands of different markets. To identify, see the code number on the box label. Code no. Version characteristics Quick guide languages...
Installation Guide eco Intelligent Radiator Thermostat 1.3 Overview of valve adapters Adapters for a wide range of different valve types are available as accessories. Adapter type Code no. Adapter Valve For Danfoss 014G0251 RA valves For M30 x 1.5 (K)
Installation Guide eco Intelligent Radiator Thermostat 1.4 Installing the right adapter Adapter for RA valves Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key. Adapter for M30 x 1.5 (K) valves Place the K adapter on the valve as shown.
After approx. two weeks the symbol will flash 14 times from 19:00 to 21:00 hrs. Before the batteries run out eco will leave the valve in Frost Protection position to protect the heating system from damage. 1.6 Using the buttons...
A large M is flashing in the display to indicate mount eco. If not, press for 4 seconds. that Installation Mode is activated. Screw eco onto the adapter and tighten by Press for 4 seconds to fix eco. hand (max. 5 Nm).
1. Adjusting to the valve During the first night of operation eco will shut off the radiator heat and then open again to detect the exact opening point of the valve. This will allow eco to control the heat as efficiently as pos- sible.
With the Allen key locking the adapter ring, Put back the battery cover. turn the adapter in the shown direction. Mount eco on another valve adapter accord- ing to the instructions supplied with the adapter. 10 06/2015...
Installation Guide eco Intelligent Radiator Thermostat 2. Technical specifications Thermostat type Programmable electronic radiator valve controller Recommended use Residential (pollution degree 2) Actuator Electromechanical Display Grey digital with backlight Software classification Control Power supply 2 x 1.5 V alkaline AA batteries (not included) 3 μW in standby...
The chosen programme P 0 , P 1 , P 2, (Travel) (Pause) Day of week The set temperature* * eco is displaying the set temperature, not the measured room temperature. 3.2 Programme menu To select the Programme menu: If the display is off, press , then press again to open the programme menu.
3 seconds. Display symbols in the Function menu Installation Mode must always be activated when installing or removing eco. The thermostat may be irreparably damaged if not in the correct position during installation. Travel programme which lowers the temperature when you are away. Date, time and temperature are configurable.
User Guide eco Intelligent Radiator Thermostat 3.4 Advanced menu To select the Advanced menu: Press both buttons for 3 seconds to open If the display is off, press , then press the Advanced menu. and hold for 3 seconds to open the Function menu.
User Guide eco Intelligent Radiator Thermostat 3.5 Pause To activate Pause from the programme menu. To confirm you want to set the eco into Pause, If the display is off, press press Press again to open the Programme menu. The Pause symbol is flashing...
Note! If the set temperature is raised more than 1 °C eco will boost the radiator heat to reach the new temperature faster. You can feel the valve and radiator are getting warmer.
User Guide eco Intelligent Radiator Thermostat 4.2 Default programme settings Programme P 0 This programme is without automatic temperature reduction. It will maintain the temperature at a constant comfort level all day and night. The default comfort temperature is 21 °C, but can be adjusted to any level between 6 and 28 °C.
User Guide eco Intelligent Radiator Thermostat 4.3 Adjusting the programme settings, P1 Change the default P1 and P2 programmes to your own schedule and preffered time and tempera- ture settings. If the display is off, press , then press and...
P1 Programme. to select. 4.4 Adjusting the programme settings, eco P 2 programme is adjusted as P1. Note - Weekdays have 2 comfort periods. 4.5 Creating a Travel programme A Travel programme keeps the setback temperature for a period, defined by you.
User Guide eco Intelligent Radiator Thermostat The day of return is flashing. Use to set the The setback temperature is flashing. Use day of return, press to confirm. to set the setback temperature, press Now the month of return is flashing. Use confirm.
User Guide eco Intelligent Radiator Thermostat 4.7 Changing an existing Travel programme If the display is off, press , then press both The day of departure is flashing, change with . Press and hold for 3 seconds to open the funtc- to confirm your changes and tion menu.
User Guide eco Intelligent Radiator Thermostat 4.9 Adjusting the Pause temperature The Pause programme keeps the setback temperature until another programme is selected. If the display is off, press , then press both The Pause temperature is set at 6° C as de- and hold for 3 seconds to open the funtc-...
User Guide eco Intelligent Radiator Thermostat 5. Additional settings 5.1 Setting the time If the display is off, press , then press both Hours flashes, use to set and press confirm. Then Minutes flashes, use to set to open the funtction menu. Use and press to confirm.
User Guide eco Intelligent Radiator Thermostat 1 flashes, indicating automatic daylight saving 0 flashes, indicating automatic daylight saving time is on. Use time is off. Press to shift to 0, press to confirm. confirm. Note: Default is set at Daylight Saving ON 5.3 Setting the Heating Control...
Intelligent Radiator Thermostat 5.4 Automatic valve exercising To keep the radiator valve functional and at its best, eco automatically exercises the valve every Thursday at approx. 11:00 hrs by opening it fully and then return to normal setting. 5.5 Activating Intelligent Control (Forecast) The Intelligent Control (Forecast) ensures that eco reaches the comfort temperature on time, ac- cording to the settings.
MAX/MIN, press to confirm. 5.7 Child Lock Protect your eco settings from tampering by activating the Child Lock. If the display is off, press , then press both is shown on the Home Screen, indicating to open the funtction menu. Press Child Lock is on.
Open-window function, which closes the valve if the room temperature is falling dramatically, thus reducing the heat loss. The heat is turned off for up to 30 minutes, before eco returns to its original settings. When Open-window has been activated, the function is quarantined for 45 minutes.