Recording Digital Tv Programs Using A Vcr Or Dvd Recorder - Pioneer PDP-5050SX Operating Instructions Manual

11 Enjoying through External Equipment
Recording digital TV programs using a
VCR or DVD recorder
If you connect recording equipment such as a VCR or DVD
recorder to the MONITOR OUT terminals on the rear of the
Plasma Display, you can record, for example, digital TV pro-
grams using the recording equipment.
Avoiding unwanted feedback
You can prevent unwanted feedback from adversely affecting
the quality of images. Specify the output terminal whose output
is to be inhibited.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Monitor Out". ( /
4
Select "INPUT1 Prohibit", "INPUT2 Prohibit", "INPUT3
Prohibit", or "INPUT4 Prohibit". ( /
5
Press HOME MENU to exit the menu.
Connecting a recorder
Plasma Display (rear view)
ANTENNA B
IN
ANTENNA/
CABLE A IN
MONITOR
VIDEO
OUT
INPUT 2
SERVICE ONLY
OUT
S-VIDEO VIDEO
• About the MONITOR OUT terminals
The MONITOR OUT terminals cannot output the following signals:
1 Video signals input from the COMPONENT VIDEO terminal (INPUT
1 or 4)
Digital video and audio signals from the HDMI terminal
2
(INPUT 3)
• When watching images played back on a VCR or DVD recorder
connected to the MONITOR OUT terminals, select an input source
(e.g., TV channel reception) on the recording equipment other than
external input sources. Selecting an external input source may result
in distorted images or noise.
44
En
11-PDP5050SX-Eng (41-45)
then ENTER)
then ENTER)
then ENTER)
DIGITAL OUT
Cable
CARD
OPTICAL
R-AUDIO-L VIDEO R-AUDIO-L
Y C /P C /P
B B R R
COMPONEN
VIDEO
COMPONEN
VIDEO
R-AUDIO-L R-AUDIO-L Y C /P C /P
S-VIDEO B B R R
AV cable (commercially
available)
VCR or DVD recorder
44
Connecting other audio equipment
The digital audio output terminal (optical) on this Plasma
Display can output Dolby Digital signals. Using an optical
digital cable, connect an AV receiver to the digital audio output
terminal (optical) on the rear of the Plasma Display. This allows
audio such as digital TV broadcasting to be played in high
quality.
If your AV receiver does not have a digital audio input terminal
(optical), connect the MONITOR OUT terminals (AUDIO) on the
rear of the Plasma Display to the audio input terminals on the
AV receiver.
• When using the digital audio output terminal (optical), you need to
make settings depending on your AV receiver. For more information,
see the instruction manual that came with the AV receiver.
Connecting an AV receiver
Plasma Display (rear view)
ANTENNA B
IN
ANTENNA/
CABLE A IN
MONITOR
VIDEO
OUT
INPUT 2
SERVICE ONLY
INPU
OUT
S-VIDEO VIDEO
INPU
Optical digital cable
(commercially available)
Switching the optical audio signal type
Set up for the DIGITAL AUDIO output terminal (OPTICAL),
depending on your AV receiver.
1
Press HOME MENU.
2
Select "Option". ( /
3
Select "Digital Audio Out". ( /
4
Select "Dolby Digital" or "PCM". ( /
Item Description
PCM Always outputs in the PCM format
(factory default) regardless of the types of signals.
Dolby Digital For Dolby Digital encoded signals, outputs in
the Dolby Digital format. For PCM encoded
signals, outputs in the PCM format.
5
Press HOME MENU to exit the menu.
05.2.25, 10:56 AM
DIGITAL OUT
Cable
CARD
OPTICAL
R-AUDIO-L VIDEO R-AUDIO-L
Y C /P C /P
B B R R
COMPON
VIDEO
COMPON
VIDEO
R-AUDIO-L R-AUDIO-L Y C /P C /P
S-VIDEO B B R R
Audio cable (commercially
available)
AV receiver
then ENTER)
then ENTER)
then ENTER)
IN
IN