Adding Extra Rinse Cycle, Extra Rinse; Presetting The Start Time, Delay Wash; High Temperature, Steam; Saving Energy, Cold Wash - LG WM3997H*A Owner's Manual

Adding extra rinse cycle,
You can add an extra rinse cycle to the default rinse
cycle.
1
Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2
Press the Extra Rinse button.
- The Extra Rinse indicator light will turn on.
3
You can now modify other cycle settings and add
options (see pages 25-28), or proceed to step 4 to
begin the cycle.
4
Press the Start/Pause button.
Presetting the start time,
You can set the desired start time.
1
Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2
Modify the cycle settings and add other options (see
pages 25-28), if desired.
3
Press the Delay Wash button repeatedly to select the
desired start time.
- The Delay Wash indicator light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay time
by one hour, up to 19 hours.
4
Press the Start/Pause button.
High temperature, Steam
Adding the Steam option to these cycles help to
enhance washing performance.
By using a hot steam fabrics get the cleaning benefits
of a super hot wash.
1
Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2
Press the Steam button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
WARNING
Do not touch the door during steam cycles. The
y
door surface can become very hot. Allow the door
lock to release before opening the door.
Do not attempt to override the door lock
y
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
Extra Rinse
Delay Wash
USING YOUR WASHING MACHINE
NOTE
y The steam option cannot be used with all cycles.
y Steam may not be clearly visible during the
steam cycles. This is normal. Too much steam
could damage clothing.
y Do not use steam with delicate fabrics such as
wool, silk, or non-colorfast fabrics.
Saving energy, Cold Wash ™
Adding the COLD WASH™ option reduces energy
usage and provides the same washing performance as
a warm water wash.
By using 6 different washing motion (Tumbling, Rolling,
Stepping, Scrubbing, Swing, Filtration), fabrics get the
cleaning benefits, without the energy usage.
1
Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2
Press the Cold Wash(TM) button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
NOTE
When you select the Cold Wash™ option, wash
y
time will be increased up to 20 minutes.
For high wash efficiency, using this option
y
with less than 8 pounds (3.6kg) of laundry is
recommended.
Saving time, Turbo Wash™
Adding the Turbo Wash(™) option to normal cycles
reduces cycle time while providing the same wash
performance.
The option uses the Twin Spray and Optimization
features of the washer to save time without sacrificing
performance.
1
Press the Power button and turn the cycle selector
knob in either direction to select the desired cycle.
2
Press the Turbo Wash(™) button. The washer will
automatically adjust the cycle settings.
3
Set any other desired options.
4
Press the Start/Pause button.
27