NEC MultiSync LCD1880SX Quick Start Manual page 15

Controls
Information
DISPLAY MODE : Provides information about the current resolution display and technical data
including the preset timing being used and the horizontal and vertical frequencies. Increases or
decreases the current resolution.
MONITOR INFO : Indicates the model and serial numbers of your monitor.
OSM
NO SIGNAL : This function gives a warning when there is no Horizontal or Vertical Sync.
After power is turned on or when there is a change of input signal, the No Signal window will
appear.
RESOLUTION NOTIFIER : This function gives a warning of use with optimized resolution. After power
is turned on or when there is a change of input signal or the video signal doesn't have proper
resolution, the Resolution Notifier window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE : This function gives a recommendation of the optimized resolution and
refresh rate. After the power is turned on or there is a change of input signal or the video
signal doesn't have proper timing, the Out Of Range menu will appear.
NOTE : If "
*
LCD1880SX_QS.P65
* Warning : OSM Warning menus disappear with Exit button.
®
CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION.
: Trademarks apply to appropriate countries.
15
English- 7
16/1/02, 12:09 pm