NEC MultiSync E500 User Manual page 11

E - 2
A high contrast screen with a 0.25 mm mask pitch sharpens image
clarity and enhances detail. On-screen information is easier to read.
The flat square CRT technology reduces image distortion and glare.
Plug and Play
Plug and Play is the new Microsoft® solution with Windows® 95 to
provide automatic peripheral connections without confusing and time-
consuming setup. When used with a Plug and Play compatible system and
video card, the MultiSync E
its identification and capabilities. The system will then select its highest
resolution and refresh rate to take advantage of your MultiSync monitor.
ErgoDesign
The MultiSync ErgoDesign features enhance human ergonomics
(human and earth conditions). MultiSync monitor's ErgoDesign will
improve the working environment, protect the health of the user and
save money. ErgoDesign parallels the strict European standards of
power management and reduced emissions:
–
automatic display power-down (also known as NUTEK
specification 803299)
–
emission characteristics (stricter than those referred to as
reduced electromagnetic fields as recommended by MPR II
and, for JC-1575VMB/R, JC-1746UMB/R, also by TCO)
–
safety (EN 60950)
MultiSync monitors comply with these standards by offering IPM
System power management and Reduced Magnetic Field technology. In
addition JC-1575VMB/R, JC-1746UMB/R complies with the strict
requirements of TCO for ergonomics and ecology and is awarded the
environmental label TCO'95.
/E monitor automatically tells the system
500 700
Introduction